CLMO is an accredited calibration laboratory by the Laboratory Accreditation Scheme of Malaysia (SAMM), Department Standards of Malaysia (DSM) since 2008. CLMO is a calibration laboratory which is specialise in the scope of environmental chamber measurement since its established in 1993. Our scope of accreditation is as below:

Instrument Calibrated / Measurement Parameter Range Calibration Measurement Capability express as an uncertainty(±) Remarks
Temperature Enclosure -80ºC to 300ºC 1ºC Temperature fluctuation only based on JTM K-05:2000 Clause 6.3
Temperature and Humidity Chamber -80ºC to 150ºC
5% RH to 98% RH
0.7ºC
4% RH
Temperature (Humidity) fluctuation only based on JTM-K01:1998 Clause 6.3
Temperature and Humidity Room -40ºC to 80ºC
5% RH to 98% RH
0.7ºC
4% RH
Temperature (Humidity) fluctuation based on JTM-K03:2001 Clause 6.3

All CLMO standards are traceable to the National Metrology Laboratory, Malaysia (NML). To ensure the quality of the measurement results, CLMO only uses the thermocouple wire that is complying to JIS standard, i.e. JIS-T-5m and JIS-K-5m with 5mm brass ball on the tip.

Additional Supports to Customer
With the expertise in chamber line, CLMO is able to provide the calibration services with additional supports, such as analyzing of calibration results and chamber failure analysis and as well as repairing of chamber.

Comments are closed.